Transfer Systems is an automation equipment that can realize automatic control, repeatable programming, multi-function, multi-degree of freedom, and right-angle relationship of motion degrees. In industrial applications, transfer systems can imitate human hand to perform many difficult movements to achieve different operations, and can also carry fixed items for palletizing and can realize the assembly line parts gripping and assembling operations, such as automatic workpiece gripping, loading, unloading, card loading, workpiece shifting and turning, workpiece sequencing processing, etc., which greatly saves labor cost and improves production efficiency.
Different application scenarios are suitable for different structures, the common ones are aluminum profile structure and square steel structure, here is the difference between square steel structure and aluminum profile structure of transfer systems.
Aluminum profile structural beam assembly truss beam slide system: industrial aluminum profile is used for truss structural beam, and V-shaped rack and pinion guide and V-shaped single edge guide are used for slide track. The material is high carbon bearing steel, the joint surface is hardened and other areas are chemically blackened. Roller slide seat, support plate high strength aluminum alloy, the surface has been eliminated anodic oxidation treatment. Bearing and roller material is carbon chromium bearing steel. Shock-absorbing device, the material is high-strength aluminum alloy, and is equipped with a rubber end stop that is co-linear with the assembled load-bearing slide seat. Cap scrapers and lubricators, drive unit assemblies, drag chains, gear driven motors and reducers.
Square steel structure assembly truss slide system: truss structure support beam four-sided square through steel, the surface is generally anti-oxidation treatment spray paint, slide system using precision linear guide. Precision ground rack and pinion linear guide, should limit device, drive device components, drag chain, slide block slide seat. Servo motor reducer.
Comparison of the above two structures: aluminum structure is easy to install, occupy little space, wide application, square steel structure is not convenient to install, the same load situation occupies a large area, the cost is relatively low, if you choose to choose according to the actual situation of the application.
Post time: Mar-11-2022